Wear-resistant 1060 aluminum plate
Product Description
1060 aluminum plate belongs to pure aluminum with a purity of
99.6%. 1060 aluminum plate contains 0.05% copper and has a
conductivity of 55%. In addition, the strength of 1060 aluminum
plate is relatively low. It is essentially pure aluminum alloy and
has many different states, such as O (annealed), H12, H14, H16,
H18, etc. In addition, other aluminum plates belonging to the
commercial pure forging series can also be used, including 1050,
1070, 1100, etc.
1060 aluminum plate has high plasticity, corrosion resistance,
electrical conductivity and thermal conductivity, but its strength
is low, it cannot be strengthened by heat treatment, and its
machinability is not good; it can be gas welded, hydrogen atom
welded, contact welded, and not easy to braze; it is easy to
withstand various pressure processing , extend and bend.
Product Display
| Chemical Composition(WT%) |
| alloy | (Si) | (Cu) | (Mg) | (Zn) | (Mn) | (Ti) | (V) | (Fe) | (Al) |
| 1060 | ≤0.25 | ≤0.05 | ≤0.03 | ≤0.05 | ≤0.03 | ≤0.03 | ≤0.05 | ≤0.35 | 99.6 |
| Mechanical behavior |
| Density | Tensile strength((N/M ㎡) | Other(％) |
| 2.71 g/cm3 | 110-136 MPa | 3-5% |
| The difference between aluminum plate 1060 H14 and 1060 H24 |
H is Hardness
1060 H14 means no heat treatment, only work hardening, so that the
tensile strength of the material is between 0 (annealed) and 8
(hard state), which is the average value. 1060 H24 in the H said processing hardening state, H24 said control
hardness and other physical properties of the processing process,
this is the semi-hard state. |
Application
1060 aluminum sheet is widely used in products which do not require
high strength. Products are often used for signs, billboards,
building decoration, bus body, high-rise buildings and factory wall
decoration, kitchen sinks, lamp holders, fan leaves, electronic
parts, chemical instruments, sheet processing parts, deep drawing
or spinning concave utensils, welding parts, heat exchangers, clock
surfaces and panels, nameplates, kitchenware, decorations,
reflective appliances, etc.
1060 aluminum sheet mainly mill finish, with blue PE films or
paper-interleaved. This alloy can’t make the heat treatment and the
main temper are H24, H14, also can be produced with fully annealed
and be soft temper. 1060 aluminum sheet can also be wildly used for
producing aluminum circles and discs which is very soft and good
for spinning and deep drawing.
FAQ
Q: Can I get samples before order ?
A: Yes, of course. Usually our samples are free,we can produce by
your samples or technical drawings.
Q: Can I go to your factory to visit?
A: Of course, we welcome customers from all over the world to visit
our factory.
Q: How can I get a quotation from you ?
A: You can send inquiry to us, and we will reply every inquiry in
time.
Q: What product information do I need to provide?
A: You need to provide the grade, width, thickness, coating and the
tonnage you need to purchase.
Q: Is there any quality inspection before product loading?
A: Of course, all of our products have undergone strict quality
inspection before packaging, and unqualified products will be
destroyed. We absolutely accept third-party inspection.
